MV MULTIVIBRATORS
THE FINISHING TOUCH FOR COMPLEX SHAPES
If you have workpieces with hard-to-process contours that require fine finishing or polishing, the multivibrators of the MV series are the ideal choice. The respective workpiece is secured mechanically or electromagnetically, and processed using vibrating abrasive media and special fluids. This ensures a consistent finish on both the internal and external surfaces.
THE BENEFITS AT A GLANCE
- High reproducibility
- Uniform finish
- Wet process with water and compound
- Suitable for 24-hour operation
- Low fitting and auxiliary process times with electromagnetic clamping device
AUTOMATED INTERNAL FINISHING ON PREMIUM PARTSOur multivibrators each have three high-speed imbalance drives that allow you to vary the position and rotation direction. This enables extremely small vibration amplitudes, ensuring high surface quality for your workpieces – even on difficult-to-reach areas. Delicate bars are protected, the workpiece contours are retained, and even small-diameter boreholes can be processed internally. |
Technical Specifications
| MV 21 | MV 25 | MV 32 | |
|---|---|---|---|
| Total weight, empty (kg) | approx. 450 | approx. 940 | approx. 2320 |
| Drive power (kVA) | 3,5 | 5,0 | 13,0 |
| Filling ceramic abrasive media (kg) | approx. 230 | approx. 470 | approx. 950 |
| Filling plastic abrasive media (kg) | approx. 150 | approx. 310 | approx. 630 |
| Max. usable volume (l) | approx. 130 | approx. 260 | approx. 530 |
| MV 21 | MV 25 | MV 32 | |
|---|---|---|---|
| A | 1250 | 1480 | 1910 |
| B | 925 | 1050 | 1290 |
| C | 1170 | 405 | 1560 |
| D | 850 | 920 | |
| E (ca.) | 616 | 750 | 1020 |
| F | 470 | 600 | 750 |
| H | 1040 | 1150 | 1430 |
| Dimensions in mm | |||
