CF CIRCULAR VIBRATORS
OUR ENTRY-LEVEL MODEL – EFFICIENT AND COST EFFECTIVE
The circular vibrators of the CF series are a perfect and simple introduction to mass finishing. The seven different configurations, with a range of different bowl sizes, offer excellent efficiency and maximum cost effectiveness. The CF circular vibrators are easy to operate and can be expanded with accessories for sound proofing or metering, for example.
THE BENEFITS AT A GLANCE
- Integrated screening unit
- Pneumatically operated separator flap
- Zero-maintenance vibration flange motors
- Two-speed drive
- Bowl sizes from 100 to 1,200 litres
- Available accessories: sound proofing lid, metering unit, magnetic separator, vibration dryer
PROCESSING AND SEPARATION – SMOOTH MASS FINISHINGThe work bowl with an evenly rising floor is perfect for processing your workpieces, as the zero-maintenance vibration flange motor works at two different speeds. The pneumatic separator flap and long separation zone allow you to gently separate your workpieces from the abrasive media. This creates a smooth mass finishing process with excellent results. |
Technical Specifications
CF 100 | CF 200 | CF 300 | CF 400 | CF 600 | CF 800 | CF 1200 | |
---|---|---|---|---|---|---|---|
Work bowl gross volume (l) | 100 | 200 | 300 | 400 | 600 | 800 | 1,200 |
Usable volume* (l) | 83 | 125 | 190 | 260 | 345 | 470 | 700 |
Largest work piece dimension (mm) | 160 | 170 | 220 | 260 | 270 | 315 | 335 |
Screen area (cm²) | 1,960 | 2,190 | 2,710 | 3,270 | 4,000 | 4,900 | 6,300 |
Total weight, empty (kg) | 510 | 740 | 1,020 | 1,190 | 1,435 | 2,110 | 2,650 |
Max. drive power at 1,500 RPM | 0,76 kW | 2,6 kW | 2,6 kW | 2,6 kW | 4.0 kW | 6.0 kW | 8.0 kW |
RPM range (RPM)** | 1000 / 1500 | 1000 / 1500 | 1000 / 1500 | 1000 / 1500 | 1000 / 1500 | 1000 / 1500 | |
Max. centrifugal force (N) | 21500 | 49000 | 49000 | 49000 | 82000 | 100000 | 142000 |
Accessories
Magnetic separator | MS 101x14 | MS 134x19 | MS 134x24 | MS 134x24 | MS 168x31 | MS 168x31 | MS 168x36 |
Vibration dryers | G 100 | G 200 | G 200 | G 200 | G 500 | G 500 | G 1000 |
* Part geometry, material and delicacy are important for the determination of the media/workpiece ratio. | |||||||
** Two-speed model. |
CF | A | C | D | E | F | G | ||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
100 | 1195 | 224 | 1100 | 1505 | 1195 | 2670 | ||||||
200 | 1225 | 238 | 1274 | 1795 | 1350 | 2670 | ||||||
300 | 1290 | 285 | 1430 | 2060 | 1460 | 2980 | ||||||
400 | 1332 | 326 | 1586 | 2384 | 1700 | 3420 | ||||||
600 | 1434 | 363 | 1727 | 2384 | 1700 | 3420 | ||||||
800 | 1548 | 396 | 1915 | 2655 | 1910 | 3780 | ||||||
1200 | 1737 | 445 | 2124 | 2787 | 2120 | 4110 | ||||||
Dimensions (in mm) |